Free Shipping
Free Shipping
Over $50
Free 14 Day Test
Free 14-Day
Bike Returns
Bikes Direct
Bikes Direct
From Manufacturer

How do I adjust the seat post insertion depth?

Remove the battery from the downtube using a 4mm hex key. Slightly loosen the fixing bolt of the cable guide where the dropper post cable enters the downtube. Loosen the seat post collar bolt. Locate the dropper post cable inside the downtube and gently push or pull the cable from this point to assist with lowering or raising the seat post position within the seat tube. Once the correct seat post height is set, tighten the seat post collar to 7Nm, tighten the cable guide and

re-install the battery.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.